| |
 |
| |
 Marine flat level Gauge |
|
 Introduction |
The TMI Marine flat level gauge is designed according to JIS standard specification.
This level gauge is used for marine oil tanks, excluding those of flash point of 60¡ÆC below.
Marine flat type level gauge allow an excellent observation of colorless liquid level gauge through
reflection of several parallel grooved glass. |
| |
| Application |
Marine flat type level gauges are used for water tank and all oil tanks. |
|
 |
|
| Technical data |
| Pressure range |
3Kg/cm2 |
| Temp. range |
100¡ÆC |
| Material |
Body:SUS304, Valve : BC6, Glass : Borosilicate |
| Conn. Size |
JIS 5K 20A, JIS 5K 25A |
| Length |
285mm To 5000mm |
| Lower valve type |
Self-closing |
| Upper valve type |
Self-closing, Tank return, Top vent pipe |
|
| |
| Standard model and specification |
| Model |
Type |
Upper
valve |
Conn.
size |
Press.
(Kg/cm2) |
Temp.
(¡É) |
Material |
Length
(mm) |
| Valve |
Body |
Glass |
| FLG-25A |
A |
Top vent |
JIS 5K 20A,
JIS 5K 25A |
ATM |
100 |
BC6 |
SUS304 |
Borosilicate |
285~5100 |
| FLG-25B |
B |
Tank return |
JIS 5K 20A,
JIS 5K 25A |
3 |
100 |
BC6 |
SUS304 |
Borosilicate |
| FLG-25C |
C |
Self-closing |
JIS 5K 20A,
JIS 5K 25A |
3 |
100 |
BC6 |
SUS304 |
Borosilicate |
|
| |
| |
| Reflex type glass level gauge |
|
| Introduction |
The Reflex type level gauge has a sturdily constructed body, with the glass and cover securely
held by U-bolts to maintain a hermetic seal.
This type of level gauge features several parallel grooves cut into the glass surface that is in with
the liquid. The resulting prismatic causes gases to appear white by Reflection: Liquids black by
absorption. Thus level of even transparent liquids can be clearly observed.
Low, medium and high pressure type may be used according to application conditions and units
may be manufactured using carbon steel, stainless steel or a wide variety of other materials for
parts in contact with the liquid. |
| |
| Application |
Boilers, Hydraulic reservoirs, Water treatment, Machinery |
|
 |
|
| |
| Standard model and specification |
| Model |
Valve
type |
Conn.
size |
Press
(Kg/cm2) |
Temp.
(¡É) |
Material |
Length
(mm) |
| Valve |
Body |
Glass |
| RLG-30H-A |
Screw down |
15A~50A,
Flanged by your
Required. |
20~35 |
200 |
Carbon or Stainless |
Carbon or Stainless |
Borosilicate |
320~2870 |
| RLG-30H-B |
Chain valve |
| RLG-30H-C |
Cock valve |
|
| |
| |
| Magnetic float type level gauge |
|
| Introduction |
A magnetic float, located in the float chamber, move up or down as changing liquid levels. An
external indicating chamber is attached to the float chamber. The Red-Green magnetic rotor in
the indicating chamber are rotated, as the magnetic float's motion with changing liquid level, one
after another at an angle of 180 ¡É by directed field of the permanent magnet inside the float. It is
indicated from Green to Red on rising level and from red to green on falling level. These magnetic
interlocking rotors provide a highly visible red and green level reading. |
| |
| Advantage |
- Highly visible
- No leakage to atmosphere
- No maintenance costs
- Widely used to measure |
|
 |
|
| |
| Application |
Water treatment, Chemical and petrochemical plants, Boilers, Hydraulic reservoirs,
All kind of Oil |
| |
| Standard model and specification |
| Model |
Mounting method |
Conn.
size |
Press.
(Kg/cm2) |
Temp.
(¡É) |
Material |
Length
(mm) |
| Chamber |
Float |
Rotor |
| MLG-100S |
Side-side |
15~50A |
5~120 |
200~450 |
SUS304/SUS316 |
SUS or Titanium |
Aluminium |
Max.5000 |
| MLG-100T |
Top |
100~150A |
5 |
200 |
|
| |
| |
| |
| Self-powered content gauge |
|
| Introduction |
The Self-powered content gauge requires no external power source for operation.
The self-powered content gauge unit consists of diaphragm, capillary tube and indication gauge. |
| |
| Advantage |
- No floats.
- Completely automatic.
- Local indication.
- No requires external power |
|
 |
|
| |
| Application |
- Fresh water
- LO, DO, FO, Solvent gasoline and all non-corrosive liquid |
| |
| Technical data |
| Gauge size |
150mm |
| Enclosure |
Weather proof(Indicator) |
| Mounting type |
Side, Submersible mounting |
| Overload |
Min. 100% of full scale |
| Scale of Indication |
Height(m), Height(m) & Volume(m3) |
| Length of capillary tube |
3 & 5meters(standard) other(option) |
| Accuracy |
¡¾1.5% of full scale |
| Isolation valve type |
Boss type, Globe valve type |
| Temperature range |
Transmitter : -20¡É to + 100¡É,
Indicator : -20¡É to + 70¡É |
|
| |
| Standard model and specification |
| Model |
Valve type |
Mounting type |
Conn.size |
Material |
Length
(M) |
| Indicator |
Capillary |
Diaphragm |
| SPG-B150 |
Boss type |
Side |
PF3/4¡° |
SUS304 |
SUS304 |
SUS316 |
1 to 50 meters |
| SPG-V150 |
Globe valve |
Side |
5K,10K, 20~40A |
SUS304 |
SUS304 |
SUS316 |
| SPG-150S |
N / A |
Submersible |
5K 100A |
SUS304 |
SUS304 |
SUS316 |
|
| |
 |
| |
